2V/4V/8A selectable voltage 7 stages smart and automatic battery charger.
Desulfurization and maintaining when charging,engage high peak pulse for deep-discharge or heavily sulphated battery.
High efficiency (>85%) . The battery can charge up to almost 95%.
Suporior Maintenance,the program engages a special charging waveform and monitors the battery voltage variety, if the battery voltage sinks, the special pulses will keep the battery in optimal state.
Temperature & Safety Protection, prevent agaist overheat,overcharge,over voltage, short circuit and polarity reversed.Charging voltage adapts to temperature to prevent over or under battery charging.
IP65 material, great prevent water and dust.
Ultra low input power consumption while in standby mode.
Test Mode: The charging is interrupted for a short period while battery voltage is measured.
☺ Suitable Battery
12 volts GEL/WET/Flooded/AGM/SLA/Sealed/VRLA/Calcium/lead-acid batteries for maintenance.
☺ Widely Application
Scooter,Motorcycle, ATV, UTV, Street Bike, Cruiser/ Touring, Dirt Bike, Adventure, Snowmobile and More.
☺ Recommend Battery Capacity
6AH to 200AH batteries
☺ BONUS: A SAE to SAE extension cord & a decent EVA BAG
☺ 7 Stages Smart Charging
Stage1: Desulphation: Engage high peak pulse for deep-discharge or sulphated battery.
Stage2: Soft start: The battery voltage will increase slowly.
Stage3: Bulk: The battery can be charged about 80%.
Stage4: Absorption: The battery can charge up to almost 95%.The charging current tapers and the charging voltage are kept constant at the set value.
Stage5: Test Mode: The charging is interrupted for a short period while battery voltage is measured.
Stage6: Recondition charging: Recover batteries from deeply discharged state increasing performance and battery life.
Stage7: Float mode: Allows the charger to effectively be left connected to your batteries.
✔ Does not over charge your battery even if it is kept connected in maintenance float mode.
✔ If AC power is connected, and the battery is not connected, the charger will automatically go into ECO mode. Input power draw in ECO mode is less than 1.5W (0.04kWh per day).Power consumption in maintenance mode is 0.05kWh per day.